Izdelki za varnost in (40)

Microwave bistatic sensors FORTEZA-FONAR are mounted into park lamps and combine protection and lighting functions. The sensors are intended for the protection of administrative buildings, park territories, office buildings, villas and other objects with high requirements for the territory appearance or secrecy of the alarm system. The sensors function as the alarm devices and decorative lamp. The lights can be switched on or off automatically or manually. The housing of one sensor can contain one or two receivers (or transmitters). Like this we decrease the number of devices on the territory and mounting works. Several frequency letters of the sensors allow for the sensors to operate near each other. It is possible to produce upon request the sensors FORTEZA-FONAR with a radio channel for wireless transmission of an alarm signal to a centralized monitoring console. Operational frequency:9,375 GHz Range:10…75 m Detection width:0,5...2 m Detection height:up to 1,7 m Supply Voltage:220 V Current consumption:0,15 A Detection probability:0.98 Operational temperature:minus 40...+65 °C Protection Level:IP-43 Alarm output:Relay contacts Dimensions:1450хØ160 mm Weight:5 kg

Interphone vidéo externe intelligent «Spoutnik» pour des immeubles collectifs résidentiels. Fonctionnalités: -Surveillance de l’état de la serrure de la porte du bâtiment. -Application mobile gratuite avec la possibilité de passer des appels vidéo. -Surveillance du terrain attenant. -Accès protégé aux clés Mifare. -Accès sans clé via Bluetooth avec les fonctions d’économies d’énergie et de reconnaissance faciale. Appareil est contrôlé à l’aide de la technologie de cloud via l’interface des applications; cela permet de connecter les appareils «Sputnik» afin de fournir de divers services et de mettre en œuvre des projets «Smart City». Dimensions:101×207×18 mm Tension de fonctionnement:12-24 V (courant continu) Température de fonctionnement:-40 – +60°С Lecteur des clés:NFC (MIFARE) ou EM-Marine Système de protection contre la poussière et l’humidité:IP 64 Système de protection contre des chocs:IK 08 Interface de commande:Interface des applications REST Caméra IP:2 mégapixels Résolution complète de la caméra :1 920 x 1 080 Informations sur la vidéotransmission:compatible à RTSP (protocole de la recopie vidéo en temps réel) et Onvif 17.06, H.264/H.265 Exigences envers la vitesse de connexion via le réseau Internet:2 mégabytes/s, DHCP (protocole de la configuration dynamique de l’hôte d’application) Connexion compatible:Ligne analogique à 2 fils, ligne numérique à 2 fils

Was ist Jetbottle? INNOVATIVE, PRAKTISCHE UND TECHNOLOGISCHE BEFÖRDERUNGSMÖGLICHKEIT DER FLASCHEN IM GEPÄCK WIE FUNKTIONIERT DIES: 1. Außenhülle aus beständigem Kunststoff + Bläschen drinnen sichern die Dauerhaftigkeit und unfallsichere Beförderung Ihrer Flasche 2. Beständige Schicht gegen mechanische Beschädigungen + Verschluss: Bruchstücke der Flasche können Jetbottle nicht durchstechen. Flüssigkeit beliebt drinnen. Welche Rolle kann Jetbottle in den Verhältnissen „Geschäftskunde“ und „Geschäft-Geschäft“ annehmen? 1. Beförderungsmöglichkeit der Flaschen im Gepäck 2. Umweltfreundliche Alternative der einfachen Tasche 3. Geschenkverpackung für Weine und andere Alkoholgetränke 4. Souvenir für Touristen 5. Eigengefertigtes Erzeugnis, das auf mehreren Märkten eingeführt werden kann 6. Umweltfreundliche Alternative der einfachen Tasche 7. Produkte für Hotel- und Restaurant-Geschäft 8. Produkte, die nach dem Loyalitätsprogramm geliefert werden 9. Geschäftsgeschenk Entwickelt und hergestellt :in Russland Potentielle Märkte:Geschäfte an den Flughäfen, Einzelhandelsgeschäfte, Weinproduzenten (Weinmarkt) Potentielle Märkte:Zollfreigeschäfte, Hotel- und Restaurant-Industrie Potentielle Märkte:Tourismusindustrie, Schönheitsindustrie Umweltaspekt:Wiederverwendbare Produkte. Bewerten Sie neue Produkte und unterstützen Sie die Umweltschutzstrategi Eigengefertigtes Erzeugnis : Eigengefertigtes Erzeugnis Kartonverpackung:100 Stk. in jeder Verpackung Kartonverpackung:0,52 х 0,36 х 0,44 m Lieferungsfrist:Vorhanden Lieferung:frei ab Werk (Moskau)

Le module OKO-P est destiné pour le suivi individuel des travaux par l’entrepreneur. Composition du module «OKO-P»: 1. Casque avec attache. 2. Module caméra vidéo avec lampe de poche, microphone et émetteur Wi-Fi. 3. Batterie remplaçable avec câble. Dimensions:50×50×65 mm Boîtier:polypropylène chargé de verre (PP-GF) Matériau du boîtier pour conditions extrêmes (-50 + 80):polyamide chargé de verre (PA-GF) Poids:150g Longueur du câble d’alimentation:1,2 m Protocole de transmission vidéo:webRTC (prise en charge du travail derrière NAT), rtsp Codec vidéo:H264 Résolution vidéo:1920×1080 pixels Fréquence de trame:25 images par seconde Emplacement microSD:64 Go Lampe de poche avec capteur de lumière:Disponibilité Consommation d’énergie:jusqu’à 5 W CARACTÉRISTIQUES TECHNIQUES DE LA FENTE DE CEINTURE POUR BATTERIES:- Dimensions:110×120×35 mm Boîtier:polypropylène chargé de verre (PP-GF) Poids:120g CARACTÉRISTIQUES TECHNIQUES DES BATTERIES:- Dimensions:73x81x30mm Capacité:5200 mAh Disponibilité du DVR:pas moins de 12 heures

Light yellow, cadmium-free, special film with a matte surface in accordance with TU 22.21.30-001-13006553-2020. The number of charge and discharge cycles of phosphors is not limited within 7 years. Total thickness:0.35 mm Thickness without supporting plate:0.185 mm (Without back paper) Flammability group:Г2 (moderately flammable) Inflammability group:B2 (moderately inflammable) Smoke generation coefficient:Д2 (moderate smoke generation capacity) Toxicity index:T2 (moderate hazards) Flame propagation group:РП2 (weakly propagating) Oxygen index:24.5% Shape stability:max 0.3 mm shrinkage when pasting on steel Tensile break elongation:150% in the transverse and longitudinal direction Thermal stability:When applied to aluminum, -40°C to +100°C, unchanged Tensile strength:min 12 MPa in the transverse and longitudinal direction Adherence temperature:at least +5°C Shelf life :at least 5 years The service life:at least 7 years

The microwave linear sensors FMW-50 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:5…50 m Detection width:0,75...2 m Detection height:up to 1,4 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:141x123x71 mm Weight:0,4 kg

FORTEZA-200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…200 m Detection width:up to 1,0 m Detection height:up to 1,6 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:211x138x112 mm Weight:2,4 kg

FORTEZA-M500 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M500 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…500 m Detection width:up to 3,5 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0,045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:395x182x100 mm Weight:2,9 kg

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-65 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:5…50 m Detection width:up to 0,7 m Detection height:up to 1,3 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:141x123x71 mm Weight:1 kg

FORTEZA-M200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…200 m Detection width:up to 2,1 m Detection height:up to 1,6 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:195,5x154,5x100 mm Weight:1,4 kg

FORTEZA-300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…300 m Detection width:up to 1,6 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+70 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:829x237x205,5 mm Weight:10 kg

FORTEZA-M50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power station, private houses, etc.) Operation on 24,15 GHz allows to: - use sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:5…50 m Detection width:up to 1,0 m Detection height:up to 1,3 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:195,5x154,5x100 mm Weight:1,4 kg

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…500 m Detection width:up to 2,5 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+70 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:829x237x205,5 mm Weight:10 kg

FORTEZA-M300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…300 m Detection width:up to 2,7 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0,045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:395x182x100 mm Weight:2,9 kg

The microwave linear sensors FMW-200 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:10…200 m Detection width:0,75...4 m Detection height:up to 1,7 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:213x213x70 mm Weight:2,4 kg

The microwave linear sensors FMW-100 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:10…100 m Detection width:0,75...3 m Detection height:up to 1,6 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:211x134x78 mm Weight:1 kg

FORTEZA-M100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-65 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

FORTEZA-1000 is a quickly deployable intrusion detection system intended for temporary protection of sites, small perimeters and perimeter sectors. The system can be used for protection of VIP aircrafts, critical cargo, precious machines, night parkings, military and medical camps, building facilities as well as for Border Service to detect the movement of criminal groups. Operational frequency 2,45 GHz NO DEAD ZONES NO MUTUAL INTERFERENCE OF ADJACENT SETS

The vibration sensors VIBRO-MG are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-MG are intended for detection of destruction of physical fences. The vibration sensor VIBRO-MG used for the protection of sewers, storm drains and other fences temporary flooded. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. VIBRO-MG keeps its specifications under water jets or during temporary flood. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-67 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. THE MICRO WIRE HAS A SMALL DIAMETER AND A MASKING COLOR. That’s why it is barely visible for an intruder and doesn’t provoke any efforts for a human during its breakage. The sensor MOSKIT is supplied from a built-in battery. SMALL DIMENSIONS AND WEIGHT. Micro wire reserve:not less than 1000 m Supply Voltage:ALKALINE battery, dimension A23 (N), 12V Current consumption in stand-by mode:0,045 A Time of continuous operation:1...1,5 months Operational temperature:minus 40...+65 °C Alarm output:alarm sound Dimensions:Ø55x90 mm Weight:0,25 kg

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. MOSKIT-KIT is intended for the sensor transportation on a waist belt in the compact bag and has two spare cartridges. MOSKIT-KIT includes: - compact bag with the fixations on a waist belt - 1 pc. - sensor MOSKIT - 1 pc. - spare cartridges in the protective pocket - 2 pc. Micro wire reserve:not less than 1000 m Supply Voltage:ALKALINE battery, dimension A23 (N), 12V Current consumption in stand-by mode:0,045 A Time of continuous operation:1...1,5 months Operational temperature:minus 40...+65 °C Alarm output:alarm sound Dimensions:Ø55x90 mm Weight:0,25 kg

The microwave linear sensors FMW-300 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:10…300 m Detection width:0,75...5 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:213x213x70 mm Weight:2,4 kg

FORTEZA-PERIMETER SOFTWARE is intended to control and manage TM Forteza sensors having RS-485 and other devices with NC connected via FORTEZA-ADAPTER (ТМ FORTEZA). FORTEZA-PERIMETER has an intuitive interface and doesn`t require special knowledges to work with it. Features of FORTEZA-PERIMETER Graphic representation of devices on the map. Automatic search for connected devices. Control of connected sensors and the colour indication of their status: alarm, norm and failure. Display of alarms number in the operation window for each device. Alarm reset for each sensor. Enable/Disable alarm sound. Indication of the subzone where an alarm occurred (for FM and MIR-M series). Connection of additional sound and light alarms via FORTEZA-CONTROLLER. Recording and storing of an event log, searching for events by a given filter and printing the protocol. LED security lightning brightness control. Possibility to change the logical number of devices. Maximum length of line:1200 m Number of lines:4 Number of devices in a line:32 Maximum devices:128 Rate of exchange:1200 ÷ 19200 bit/sec

Freiprogrammierbare Videogegensprechanlage „Sputnik“ für die Mehrfamilienhäuser Funktionen: - Zustandkontrolle des Türverschlusses - Kostenlose mobile Anwendung mit der Videogespräch-Funktion - Überwachung des Außenbereiches - Sicherheitszugriff zu Mifare-Schlüsseln - Zugang ohne Schlüssel mittels Bluetooth mit geringem Energieverbrauch und Face-ID-Funktion Anlagensteuerung erfolgt durch den Cloud-Dienst via Schnittstelle von Anwendungsaufgaben. Dies ermöglicht die Videogegensprechanlage „Sputnik“ zur Erbringung verschiedener Dienstleistungen und Ausführung von Smart City-Projekten anzuschließen. Ausmaß:101×207×18 mm Betriebsspannung :12-24 W des Gleichstroms Betriebstemperatur:-40 – +60°С Schlüssellesegerät:NFC (MIFARE) oder EM-Marine Staub- und Feuchtigkeit-Schutzsystem:IP 64 Stoßschutzsystem:IK 08 Schnittstelle der Steuerung:Schnittstelle von REST-Anwendungsaufgaben IP-Kamera:2 Megapixels Höchste Auflösung der Kamera:1 920 x 1 080 Informationen zur Videosendung:RTSP-kompatibel (Fluss-Echtzeitprotokoll) und Onvif 17.06, H.264/H.265 Anforderungen zur Geschwindigkeit der Internetverbindung:2 MB/Sek;, DHCP (Dynamic Host Configuration Protocol) Unterstützte Verbindung :2-Leiter analoge Linie, 2-Leiter digitale Linie

Videocitofono esterno intelligente "Sputnik" per i condomini. Funzioni: - Monitoraggio dello stato della serratura della porta dell'edificio - Applicazione mobile gratuita con la possibilità di effettuare videochiamate - Sorveglianza del territorio adiacente - Accesso protetto alle chiavi Mifare - Accesso senza chiave con Bluetooth a basso consumo energetico e riconoscimento facciale Il dispositivo è controllato utilizzando la tecnologia cloud attraverso un'interfaccia applicativa, che consente di collegare i dispositivi al Sputnik al fine di fornire vari servizi e realizzare progetti Smart City. Dimensioni:101 x 207 x 18 mm Tensione d'esercizio :12-24 VDC Temperatura d'esercizio:-40 – +60°C Lettore di chiavi:NFC (MIFARE) o EM-Marine Sistema di protezione da polvere e umidità:IP 64 Sistema di protezione dagli urti:IK 08 Interfaccia di gestione:Interfaccia dell'applicazione REST Camera IP:2 megapixel Risoluzione completa della camera:1920 x 1080 Informazioni sulla trasmissione video:Compatibile con RTSP (Real Time Streaming Protocol) e Onvif 17.06, H.264/H.265 Requisiti di velocità per la connessione Internet:2 Mbps, DHCP (Dynamic Host Configuration Protocol) Connessione supportata :Linea analogica a 2 fili, linea digitale a 2 fili

Videoportero externo inteligente "Sputnik" para edificios multifamiliares residenciales. Funciones: - Monitoreo del estado de la cerradura de la puerta del edificio - Aplicación móvil gratuita con capacidad para realizar videollamadas - Vigilancia del territorio adyacente - Acceso protegido a las llaves de Mifare - Acceso sin llave mediante Bluetooth con bajo consumo de energía y reconocimiento facial El dispositivo se controla mediante tecnología en la nube a través de una interfaz de tareas aplicadas, que le permite conectar dispositivos “Sputnik” para brindar diversos servicios e implementar proyectos de Smart City. Dimensiones:101×207×18 mm Voltaje de trabajo:12-24 V de corriente continua Temperatura de trabajo:-40 – +60°С Lector de llaves:NFC (MIFARE) o EM-Marine Sistema de protección contra el polvo y la humedad:IP 64 Sistema de protección contra impactos:IK 08 Interfaz de control:Interfaz de tareas aplicadas REST Cámara IP:2 megapíxeles Resolución completa de la cámara:1 920 x 1 080 Información de transmisión de video:Compatible con RTSP (protocólo de transmisión en tiempo real) y Onvif 17.06, H.264/H.265 Requisitos de velocidad de la conexión de Internet:2 Mb/seg;, DHCP (protocólo de configuración dinámica de host) Conexión compatible:Línea analógica de 2 hilos, línea digital de 2 hilos

Inteligentny wideodomofon zewnętrzny „Sputnik” do budynków wielorodzinnych. Funkcje: - Monitorowanie stanu zamka do drzwi wejściowych budynku - Darmowa aplikacja mobilna z możliwością prowadzenia rozmów wideo - Monitorowanie obszaru przyległego - Zabezpieczony dostęp do kluczy Mifare - Dostęp bezkluczykowy dzięki technologii Bluetooth Low Energy i funkcji rozpoznawaniu twarzy Zarządzanie obywa się z wykorzystaniem technologii chmury poprzez interfejs aplikacji, który umożliwia podłączenie urządzenia „Sputnik” w celu świadczenia różnych usług i realizacji projektów Smart City. Wymiary:101×207×18 mm Napięcie robocze:12-24 V prądu stałego Temperatura pracy:-40 – +60°С Czytnik kluczy:NFC (MIFARE) lub EM-Marine System ochrony przed kurzem i wilgocią:IP 64 System ochrony przed uderzeniami:IK 08 Interfejs sterowania:Interfejs aplikacji REST Kamera IP:2 megapikseli Całkowita rozdzielczość kamery :1 920 x 1 080 Informacje o transmisji wideo:Kompatybilny z RTSP (Real Time Streaming Protocol) i Onvif 17.06, H.264/H.265 Wymagania dotyczące szybkości Internetu:2 Mbps;, DHCP (protokół dynamicznej konfiguracji hosta) Obsługiwane połączenie :2-przewodowa linia analogowa, 2-przewodowa linia cyfrowa

El módulo “OKO-M” está destinado para el control del trabajo de las brigadas o de la técnica de construcción (grúas, excavadoras) en las plazoletas temporales. Puede usarse como punto del acceso para el OKO-P. El módulo OKO-P está destinado para el control individual de los trabajos por el ejecutante. Composición del módulo “OKO-M”: 1. Módulo de la videocámara con micrófono y transmisor Wi-Fi 2.Тripod Dimensiones máximas:80×170×70 mm Маterial del cuerpo:cristal relleno de acrilonitrilo butadieno estireno (ABS-GF30) Material del cuerpo en la variante para las condiciones extremas (-50 + 80):cristal relleno de poliamida (PA-GF) Peso:600 g Longitud del cable de alimentación:2 m Slot para microSD:64 Gb Protocolo de la transmisión del vídeo:webRTC (apoyo del trabajo por NAT), rtsp Códec vídeo:H264 Resolución del vídeo:1920×1080 px Frecuencia de los cuadros:16 cuadros/s Frecuencia de los cuadros:hasta 8 W